-
XS Scuba Scuba Multi-ToolVendor: XS ScubaValve DIN insert 1/4” hex wrench Port plugs 3/16” hex wrench Valve dip tube 5/32” hex wrench Valve nut slotted screwdriver Phillips screwdriver Inflator schrader valve tool Bronze O-ring pick Orifice adjustment flat screwdriver
- $54.77
-
- $54.77
- Unit price
- per
-
XS Scuba Folding Wrist SlateVendor: XS ScubaDesigned to fit the curve of a forearm Three separate writing surfaces with two fold up leafs Carbon stick pencil Dimensions 4.25” wide x 4.0" tall (10.8 x 10.2 cm) Two methods for attachment included: hook-and-loop strap and bungee cords
- $48.99
-
- $48.99
- Unit price
- per
-
XS Scuba Bungee CordVendor: XS ScubaNo need to sell bungee cord by the foot. This small 25 ft (7.6 m) roll is consumer friendly. With so many varied uses, every diver should keep a roll on hand. The 5/32 in (4 mm) diameter is the most popular size. Common...
- $24.99
-
- $24.99
- Unit price
- per
-
XS Scuba 1.9” Stainless Steel Quick-LinkVendor: XS ScubaWhen you need something more permanent than a clip, a Quick Link is what you want. Useful for attaching chain to small anchors 316 grade stainless steel construction
- $5.58
-
- $5.58
- Unit price
- per
-
Scubapro S-Tek Bungee Regulator NecklaceVendor: ScubaproThe regulator necklace is a great way to keep your octo close and always ready for quick deployment. Made of quality bungee, this flexible necklace fits under the mouthpiece clip of any regulator second stage. It’s a must-have accessory for all tech divers.
- $23.99
-
- $23.99
- Unit price
- per
-
Scuba Force Ergonomic Stainless Steel Double-ender Bolt Snap 4.75”Vendor: Scuba ForceErgonomic Stainless Steel Swivel Double-ender Bolt Snap 4 ¾” 316 grade stainless steel construction Internal spring is 18-8 “rust-free” stainless steel
- $25.99
-
- $25.99
- Unit price
- per
-
Scuba Force Ergonomic Stainless Steel Swivel Bolt Snap 4.5”Vendor: Scuba ForceErgonomic Stainless Steel Swivel Bolt Snap 1 ½” x 4 ½” 316 grade stainless steel construction Internal spring is 18-8 “rust-free” stainless steel
- $21.99
-
- $21.99
- Unit price
- per
-
Innovative Scuba Concepts Basic BC Hanger BlackVendor: Innovative Scuba ConceptsHold a BC and regulator on one hanger. Lower hooks hold a regulator by the hoses Wide 1.0 in (2.5 cm) support beams Sturdy one-piece construction Tough X-beam design Dimensions: 15.8 x 9.8 x 1.0 in (40 x 25 x 2.5 cm) Weight: 5...
- $11.15
-
- $11.15
- Unit price
- per
-
XS Scuba T Retainer for 2” WebbingVendor: XS Scuba316 grade stainless steel construction
- $5.58
-
- $5.58
- Unit price
- per
-
XS Scuba Deluxe Folding SlateVendor: XS ScubaGreat folding design Sturdy attachment clip Unique adjustable lead pencil Dimensions closed: 5.75 x 7.5 in (14.6 x 19 cm) Dimensions open: 10.75 x 7.5 in (27.3 x 19 cm)
- $41.99
-
- $41.99
- Unit price
- per
-
Hollis 3 Bar Slide Serrated 2.0"Vendor: Hollis316 grade stainless steel construction
- $8.95
-
- $8.95
- Unit price
- per
-
XS Scuba Wrench SetVendor: XS ScubaThree combination wrench set 1/2” by 7/16”, 5/8” by 1/2” and 11/16” by 9/16” Fit for most common regulator hoses Stainless steel construction 6 in (16.5 cm) wrench length Perfect for any diver’s save-a-dive kit
- $41.99
-
- $41.99
- Unit price
- per
-
XS Scuba Single Weight PocketVendor: XS ScubaDesigned to add up to 5 lbs (2.25 kg) of bagged shot or hard weight Attaches by sliding over the end of 2 in (50 mm) webbing Easy addition to tank band, weight belt or other harness systems Perfect for adjusting your trim in...
- $23.99
-
- $23.99
- Unit price
- per
-
XS Scuba Flashlight/Camera Locking RetractorVendor: XS ScubaStandard size retractor Lock the cable open, closed or anywhere in the middle Attach to gear with stainless steel split ring or nylon lanyard Attach to diver with Delrin snap hook attachment Dimensions 2.6 x 2.2 x 0.8 in : 66 x 56 x...
- $62.99
-
- $62.99
- Unit price
- per
-
XS Scuba 4.7” Spring HookVendor: XS ScubaWhile they serve many purposes, Spring Hooks are a strong, secure way to attach accessories to your harness or BC. 316 grade stainless steel construction
- $34.99
-
- $34.99
- Unit price
- per
-
XS Scuba 1” Split RingsVendor: XS Scuba5 pack Split rings, like tie wraps, are a diver’s best friend. Use them to attach items to your D-rings, such as car keys, lanyards and retractors. Keep some in your save-a-dive kit. They’re inexpensive but oh so useful. 25 mm outer diameter 304...
- $6.60
-
- $6.60
- Unit price
- per
-
Scubapro Quick Octopus Clip MagneticVendor: ScubaproKeep your octopus safe and secure and always accessible with a magnetic OCTOPUS CLIP. Simply attach one end of the OCTOPUS CLIP to your BC and the other to your octopus. The powerful magnet keeps your octopus attached to your BC until needed, then...
- $43.99
-
- $43.99
- Unit price
- per
-
XS Scuba Cave Marker HolderVendor: XS ScubaThe Highland Cave Marker Holder is a smart way to safely secure and organize your cave markers. Simply pull the tubing to add or remove your markers. Relax the tubing and the markers are held firmly in place. Organized storage – no more hunting...
- $30.99
-
- $30.99
- Unit price
- per
-
XS Scuba Flared Stainless Steel Finger SpoolsVendor: XS ScubaFlared edges are easier to grip and keep fingers out of the way Large center hole fits gloved thumb 304 stainless steel with anodized surface #24 orange line, 8 strand, with breaking strength of 168 lbs (76 kg) 4” stainless steel double-ender bolt snap...
- From $67.49
-
- From $67.49
- Unit price
- per
-
XS Scuba 2.0” SS Welded D-Ring 6mmVendor: XS Scuba316 grade stainless steel construction
- $4.25
-
- $4.25
- Unit price
- per
